0.0781 in. (5/64) Cutter Diameter x 0.188 in. Length of Cut Carbide 3 Flute Ball Endmill

BEM-078-03

0.0080 in. (.2 mm) Cutter Diameter x 0.0060 in. Length of Cut x 0.0120 in. Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

37808-C6

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

62062-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

22712-C3

0.3750 in. (3/8) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut 2 Flute Carbide Ball End Mill

49624-HARVEY

0.1250 in. (1/8) Cutter Diameter x 1.0000 in. (1) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

997108

0.1875 in. (3/16) Cutter Diameter x 1.0000 in. (1) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

997112

0.5000 in. (1/2) Cutter Diameter x 2.0000 in. (2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

997132

0.1875 in. (3/16) Cutter Diameter x 0.4370 in. (7/16) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

979212

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 3 Deg. 1.2470 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

996642-C8

1.200 mm Cutter Diameter x 3.500 mm Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

975327-C6

0.1000 in. Cutter Diameter x 0.1500 in. Length of Cut x 0.8000 in. Reach 4 Flute 9 Micrometer CVD Diamond Coated Carbide Ball End Mill

62100-HARVEY

3/16 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

3191-4.76

1.00mm (.3937) Dura-Carb Series 3215 2-Flute GP SE End Mill- Ball/ Stub

92156-FULLERTON

1/8 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose TiCN Coated Endmill

CEM18BL4TICN