7.00mm (.2756) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

92275-FULLERTON

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

3166-4.76

0.0469 in. (3/64) Cutter Diameter x 0.1560 in. (5/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

23203-C3

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 0.5000 in. (1/2) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

32062-C6

0.3750 in. (3/8) Cutter Diameter x 1.0000 in. (1) Length of Cut 4 Flute TiCN Coated Carbide Ball Endmill

TC91524

1/4 x 3/8 x 1/4 x 4 Inch Solid Carbide AlTiN Coated 4-Flute Finishing Ball Nose Endmill

TM7S5F07004

1/2 x 1/2 x 1-1/4 x 3 Inch Solid Carbide TiAlN 4-Flute Ball Nose Endmill

TF4V0013015

0.2188 in. (7/32) Cutter Diameter x 0.4375 in. (7/16) Length of Cut 4 Flute Carbide Ball Endmill

TC10714

0.1875 in. (3/16) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

23212

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 2 Flute Carbide 45 Deg. Helix Ball End Mill

27831-HARVEY

0.3125 in. (5/16) Cutter Diameter x 1.5000 in. (1-1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

29520-C3

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 7 Deg. 0.8160 in. Taper Reach 2 Flute AltiN Nano Coated Carbide Ball End Mill for Medium Alloy Steels

40462-C6

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 1.2500 in. (1-1/4) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

38816-C6

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 2.0000 in. (2) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

32116-C6

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, Ball Nose

3165-3.17