0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 1.5 Deg. 0.8010 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

997870-C8

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 1.5 Deg. 1.2930 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

997877

0.1250 in. (1/8) Cutter Diameter x 0.1000 in. Length of Cut x 1.5 Deg. 1.2930 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

997877-C8

0.0930 in. (3/32) Cutter Diameter x 0.0740 in. Length of Cut x 1.5 Deg. 0.8010 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

997870

0.1875 in. (3/16) Cutter Diameter x 0.1500 in. Length of Cut x 1.5 Deg. 1.3430 in. (1-11/32) Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

997887

0.1875 in. (3/16) Cutter Diameter x 0.1500 in. Length of Cut x 1.5 Deg. 1.3430 in. (1-11/32) Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

997887-C8

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 1.5 Deg. 1.3930 in. Taper Reach 2 Flute Carbide Ball End Mill for Aluminum Alloys

997892

0.2500 in. (1/4) Cutter Diameter x 0.2000 in. Length of Cut x 1.5 Deg. 1.3930 in. Taper Reach 2 Flute TiB2 Coated Carbide Ball End Mill for Aluminum Alloys

997892-C8

0.0310 in. (1/32) Cutter Diameter x 0.0250 in. Length of Cut x 0.5 Deg. 0.7570 in. Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

998703-C6

0.0310 in. (1/32) Cutter Diameter x 0.0250 in. Length of Cut x 0.5 Deg. 0.8170 in. Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

998706-C6

0.0310 in. (1/32) Cutter Diameter x 0.0250 in. Length of Cut x 0.5 Deg. 0.9060 in. (29/32) Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

998709-C6

0.0470 in. (3/64) Cutter Diameter x 0.0380 in. Length of Cut x 0.5 Deg. 0.7720 in. Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

998712-C6

0.0470 in. (3/64) Cutter Diameter x 0.0380 in. Length of Cut x 0.5 Deg. 0.8620 in. Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

998715-C6

0.0470 in. (3/64) Cutter Diameter x 0.0380 in. Length of Cut x 0.5 Deg. 0.9810 in. Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

998718-C6

0.0620 in. (1/16) Cutter Diameter x 0.0500 in. Length of Cut x 0.5 Deg. 0.8790 in. Taper Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

998721-C6