0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

63662-C6

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 3 Flutes Ball Nose Endmill

GMA14B3

5/16 (.3125) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Stub

32874-FULLERTON

0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 6 Flute Tplus Coated Ball Endmill

83365

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.8750 in. (7/8) Length of Cut x 3.0000 in. (3) Overall Length Carbide 4 Flute Aplus Coated Carbide Ball Endmill

56332-HELICAL

0.3750 in. (3/8) Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

994724-C3

0.600 mm Cutter Diameter x 0.900 mm Length of Cut x 7.200 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

981313-C6

1/8 in. Diameter x 1/8 in. Length of Cut x 3 in. Overall Length Carbide 2 Flutes Ball Nose GMS2 Coated Die Mold Endmill

DMC18B2TS3

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 6 Flute Aplus Coated Carbide Ball Endmill

59443

1/8 x 1/4 x 1-1/2 Inch ALTiN Coated 4-Flute Ballnose Stub Length Endmill

05140-400-Z5

3/64 (.0469) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

30718-F

5/16 (.3125) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Extra-Long

30079-FULLERTON

1/2 (.5000) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

30747

0.0312 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 220 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

22802-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0160 in. Length of Cut x 0.0620 in. (1/16) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

31420-C6