0-1 Inch, 0.0001 In, Digit Counter Spherical Face Micrometer, Carbide Steel Tip, Spherical Anvil Flat Spindle, 0.40 In Max Inside Diameter, Ratchet Stop

295-153

0-1 Inch, 0.0001 Inch, Digit Counter Spherical Face Micrometer, Carbide Steel Tip, Spherical Anvil Spherical Spindle, 0.40 In Max Inside Diameter, Ratchet Stop

295-253

0-1 Inch, .0001 Inch, Digit Counter Micrometer Head, .375 Inch Diameter Plain Stem, Flat Carbide Tipped Spindle Face

250-312-MITUTOYO

7 to 8 Inch Range, 0.0001 Inch Resolution, Standard Throat, IP65 Electronic Outside Micrometer

293-353-30

1 Inch - 2 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop, With Standard

323-351-30

2 Inch - 3 Inch, 0.00005 Inch, IP65 Digimatic Disk Micrometer, .787 Inch/20mm Diameter .028 Inch/0.7mm Edge Thickness Disk, With SPC Data Output, Ratchet Stop, With Standard

323-352-30

2 Inch - 3 Inch, 0.00005 Inch, IP65 Digimatic Screw Thread Micrometer, With SPC Data Output, Ratchet Stop, With Standard, Optional Anvils Available

326-353-30

0-6 Inch, 0.00005 Inch, IP65 DigimaticInterchangeable Anvil Micrometer, With 6 Anvils and 5 Standards, With SPC Data Output, Ratchet Stop

340-351-30

6 Inch - 12 Inch, 0.00005 Inch, P65 DigimaticInterchangeable Anvil Micrometer, With 6 Anvils and 6 Standards, With SPC Data Output, Ratchet Stop

340-352-30

1 Inch - 2 Inch(25-50mm), 0.00005 Inch(0.001mm) Digimatic Caliper Jaw Type Micrometer, Carbide Steel Tip, Locking Clamp, With SPC Data Output, Ratchet Stop

345-351-30

0-1 Inch/0-25.4mm, .00005 Inch/0.001mm, Digimatic Micrometer Head, .375 Inch Diameter Stem with Clamp Nut, Flat Carbide Tipped Spindle Face, Ratchet Stop

350-352-30

0.8 Inch - 1 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

368-266

1 Inch - 1.2 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

368-267

1.2 Inch - 1.6 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

368-268

1.6 Inch - 2 Inch, 0.0002 Inch, Holtest, Titanium Nitride Coated Contact Points, Ratchet Stop

368-269