0.03 In, Dial Test Indicator, Basic Set 0-15-0, 0.0005 Inch Graduation, 3/8 Inch Stem, 0.079 Inch Contact Point, 19.9mm Length, Anti-Magnet, Jeweled Bearing

513-402-10E

6 Inch, 150mm, Pocket Steel Rule, 1/2 Inch Wide , Pocket Clip, (1/64,1mm)

950-300

0-1 Inch, 0.00005 Inch, IP65 Uni-Mike Digimatic Interchangeable Anvil Micrometer, With SPC Data Output, Friction Thimble, Flat and Rod Anvils Included

317-351-30

0-40 Inch(1000mm), 0.0005 Inch(0.01mm), ABSOLUTE Digimatic Caliper, With SPC Data Output, No Thumb Roller

500-507-10

0-1 Inch Measuring Range, 0.0001 Graduation, Ratchet Thimble, Carbide Face, Ball Anvil Micrometer

115-153

0-6 Inch(150mm), 0.0005 Inch(0.01mm), ABSOLUTE AOS Digimatic Caliper, With SPC Data Output, Carbide OD Jaws

500-174-30

6-7 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

103-183

7-8 Inch Measuring Range, 0.001 Graduation, Ratchet Thimble, Carbide Face, Outside Micrometer

103-184

1/32 Inch - 17/64 Inch, Concave/Convex Radius Gage Set, 16 Pairs of Leaves (1/32 Inch to 17/64 Inch by 64ths), Locking Clamp

186-103

1mm-7mm, Concave/Convex Radius Gage Set, 34 Pairs of Leaves (1mm to 3mm by 0.25mm, 3.5mm to 7mm by 0.5mm), Locking Clamp

186-105

7.5mm-15mm, Concave/Convex Radius Gage Set, 32 Pairs of Leaves ( 7.5mm to 15mm by 0.5mm), Locking Clamp

186-106

15.5mm-25mm, Concave/Convex Radius Gage Set, 15 Pairs of Leaves (15.5mm to 20mm by 0.5mm, 21 to 25mm by 1mm), Locking Clamp

186-107

1/64 Inch - 17/64 Inch, Concave/Convex Radius Gage Set, 17 Leaves (1/64 Inch to 17/64 Inch by 64ths)

186-903

2 x 1-3/4 Inch Base Size Power On/Off with Fine Adjustment - Magnetic Base Indicator Holder

NE60-PBMB2

17/64 to 1/2 Inch - 32 Pieces - MGR1110 - Radius Gage Set

NE60-RG32