0.1000 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute TiN Coated Carbide Double Ended Corner Rounding End Mill

46100-C1

0.0600 in. Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

CRE-187-060

0.0120 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

46012-HARVEY

0.0890 in. Radius x 0.2480 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

21089-HARVEY

0.0250 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

46025-C3

0.0600 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

46060-HARVEY

0.1250 in. (1/8) Radius x 0.0600 in. Pilot Diameter 2 Flute Amorphous Diamond Coated Carbide Double Ended Corner Rounding End Mill

46125-C4

0.0930 in. (3/32) Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

16093

0.1250 in. (1/8) Radius x 0.0580 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

17125-C3

0.0200 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute TiN Coated Carbide Double Ended Corner Rounding End Mill

46020-C1

0.0470 in. (3/64) Radius x 0.2500 in. (1/4) Head Diameter x 0.6250 in. (5/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

16047-HARVEY

0.0200 in. Radius x 0.2500 in. (1/4) Pilot Diameter 4 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

44020-C3

0.1870 in. (3/16) Radius x 0.2500 in. (1/4) Pilot Diameter 4 Flute Carbide Double Ended Corner Rounding End Mill

44187-HARVEY

0.0620 in. (1/16) Radius x 0.0460 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

17062-HARVEY

0.0120 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

46012-C3