0.0100 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

46010-C3

0.0200 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

46020-C3

0.5000 in. (1/2) Radius x 0.4060 in. (13/32) Pilot Diameter 3 Flute AlTiN Coated Carbide Tipped 5 Deg. Flare Corner Rounding End Mill

45032-C3

0.0600 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

46060-C3

0.0390 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

46039-C3

0.0300 in. Radius x 0.0460 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

17030-C3

0.0600 in. Radius x 0.0460 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

31660-HARVEY

0.0500 in. Radius x 0.0460 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

17050-C3

0.2360 in. Radius x 0.1100 in. (2.8 mm) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

46236-C3

0.0200 in. Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

CRE-125-020

0.0310 in. (1/32) Radius x 0.0530 in. Pilot Diameter Carbide 2 Deg. Flare 3 Flute ZPLUS Coated Corner Rounding Endmill

87631

0.2500 in. (1/4) Radius x 0.1070 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

17250-C3

0.0469 in. (3/64) Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

CRE-187-047

0.0250 in. Radius x 0.0460 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

17025-C3

0.1250 in. (1/8) Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

68125-HARVEY

0.1250 in. (1/8) Radius x 0.0580 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

31725-C3

0.0150 in. (1/64) Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

46015-HARVEY

0.2500 in. (1/4) Radius x 0.1070 in. Pilot Diameter 4 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

68250-C3

0.0800 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

16080

0.0312 in. (1/32) Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

CRE-125-031

0.1250 in. (1/8) Radius x 0.2480 in. Pilot Diameter 3 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

973008

0.1250 in. (1/8) Radius x 0.2480 in. Pilot Diameter 3 Flute AlTiN Coated Carbide 5 Deg. Flare Corner Rounding End Mill

973008-C3

0.1870 in. (3/16) Radius x 0.2480 in. Pilot Diameter 3 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

973012

0.1870 in. (3/16) Radius x 0.2480 in. Pilot Diameter 3 Flute AlTiN Coated Carbide 5 Deg. Flare Corner Rounding End Mill

973012-C3

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.3750 in. (3/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

985050