MCLN, Left Hand, -5 Degree Lead Angle, 5/8 Inch Shank Height, 5/8 Inch Shank Width, CNMG 322 Insert Compatability Indexable Turning Toolholder

MCLNL103A

25.005mm Diameter 5xD Drill, 2 flutes, tool steel, nickel-plated Coated, with Coolant, Whistle Notch Shank, Right Hand Cut

4108-25.005

MWLN, Right Hand, -5 Degree Lead Angle, 1-1/4 Inch Shank Height, 1-1/4 Inch Shank Width, WNMG 432 Insert Compatability Indexable Turning Toolholder

MWLNR204D-SUMI

116mm Max Drill Depth, 3xD, 37mm Diameter, Indexable Insert Drill

WDX370D3S40

1 Inch Diameter, Drill Body, 2 flutes, Carbide, FIREX Coated, 140° Point, Right Hand Cut

4112-25.40

3.000 in. Overall Length Extended Reach Tool Holder

36730

144mm Max Drill Depth, 2xD, 72mm Diameter, KOMET KUB® Indexable Drill Insert

V1437200

2 Inch Dia. x 1.500 Inch Length x 0.75 Inch ID 5 Flute Shell Shoulder Mill Holder

M680D200Z05S075XP16

7.815 Inch Max Drill Depth, 3xD, 2-1/2 Inch Diameter, Indexable Insert Drill

WDX2500D3S150

0.1880 Inch Dia. x 4.000 Inch Overall Length x 0.275 Inch Min Dia. S-Clamp RH Boring Bar

FCBI18745R-WG

3/8 Inch Dia. x 5.000 Inch Overall Length x 0.438 Inch Min Dia. S-Clamp RH Boring Bar

QSBI37555R-WG

2.368 Inch Max Drill Depth, 2xD, 1-1/8 Inch Diameter, Indexable Insert Drill

WDX1125D2S125

3.407 Inch Max Drill Depth, 2xD, 1-5/8 Inch Diameter, Indexable Insert Drill

WDX1625D2S150

External, Right Hand, Series GND Indexable Grooving Toolholder (U104417)

GNDLR166M-100

22.505mm Diameter 5xD Drill, 2 flutes, tool steel, nickel-plated Coated, with Coolant, Whistle Notch Shank, Right Hand Cut

5243-22.505