3mm Diameter Spot Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 90° Point, Right Hand Cut
NC spot drills are high precision drills designed specifically for creating an accurate hole location for a secondary drilling operation. NC spot drills due not have body clearance and are not designed to drill greater than the depth of the point angle. The 90° and 120° spot drills are primarily used to create an initial spot for 118° and 135° secondary drills respectively. The 142° point NC Spot drill, series 546, is designed to help center carbide drills with an angle of 140°.
Features Back To Top
- Special drill
- Only suitable for spotting
Tech Specs Back To Top
Brand | Guhring |
---|---|
Coating/Finish | TiN |
Coolant | without |
Cutting Direction | Right Hand |
Decimal Size | 0.1181" |
Flute Length (mm) | 12 |
Length of Cut (mm) | 7.5 |
Material | High Speed Steel |
Metric Size | 3.00 mm |
Number of Flutes | 2 |
Overall Length (mm) | 46 |
Point Angle | 90° |
Series | 568 |
Shank Diameter (mm) | 3 |
Shank Type | Straight |