Features Back To Top

• For hot work use
• Twin-leg 100% tie-off design
• Built-in connector for twin-leg SRL direct attachment to harness
• 6 ft. (1.8m) twin-leg lifelines with 3/4" (19mm) Kevlar fiber webbing
• Locking gate/nose aluminum rebar hook on each lifeline
• Tough and impact resistant thermoplastic housing
• Swiveling anchorage loops
• Quick activating speed sensing brake systems
• High capacity energy absorber and impact indicator protected by Kevlar fiber cover
• 3M Connected Safety ID (CSID) equipped
• Wide variety of configurations available

 

Legal Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.