7/64 (.1094) Solid Carbide, 60° Included Angle, Double End, Series 2305 Center Drill
Fullerton's solid carbide 2305 series Center Drill is a combination drill & countersink used in a wide variety of materials. With this design, centering and chamfering can be accomplished in a single operation.
Features Back To Top
- 2 Flutes
- 118 deg. Cam Relieved Pilot Point
- 60 deg., 82 deg. & 90 deg. Included Angle Countersinks
- Right Hand Spiral
- Right Hand Cut
- Double End
- Standard Uncoated
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: h6
- Pilot Diameter Tolerance: +.003 -. 000 / +0.08 -0.00mm
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating/Finish | None |
Coolant Through | No |
Countersink Angle (Degrees) | 60 |
Decimal Diameter | 0.1094" |
Direction of Cut | RH |
End Type | DE |
End Type Character Designation | CAM |
Flute Spiral Direction | RH |
Fractional Diameter | 7/64" |
Material | Solid Carbide |
Metric Diameter | 2.78 mm |
Metric/Inch | Inch |
Number of Flutes | 2 |
Overall Length Decimal | 2.0000" |
Overall Length Fractional | 2" |
Overall Length Metric | 50.80 mm |
Pilot Diameter (Decimal Inch) | 0.1094 |
Pilot Diameter (Inch) | 7/64 |
Pilot Diameter (mm) | 2.78 |
Point End Type | Cam Relieved |
Point Include Angle (Degrees) | 118 |
Series | 2305 |
Shank Diameter (Decimal Inch) | 0.2500 |
Shank Diameter (Inch) | 1/4 |
Shank Diameter (mm) | 6.35 |
Tool Number | 3 |
Tool Set | 75101 |
Weldon Flat | No |