.12 hp, 7° Offset, 13,000 RPM, 1/32 Inch (1 mm) Dia. Orbit, Rear Exhaust, Dynafine Detail Sander, Non-Vacuum

57900

.2 hp, Right Angle, 0-1/4 Inch (0-6 mm) Stroke, 5,000 SPM, Dynadie III Reciprocating Filer

12250

.4 hp Straight-Line Die Grinder, 25,000 RPM, Gearless, Front Exhaust, 1/4 Inch Collet

52200

.7 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8 Inch (16 mm) Dia. Arbor, Dynastraight Finishing Tool

13202-DYNABRADE

1 hp, Straight-Line, 1,800 RPM, Rear Exhaust, 5/8 Inch (16 mm) or 1 Inch (25 mm) Dia. Arbor, Dynastraight Finishing Tool

13501

1.2 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2 Inch W x 34 Inch L (51 mm x 864 mm) Belts, Dynangle II Abrasive Belt Tool, Single Motor

14300-DYNABRADE

.7 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 2 Inch (51 mm) W Roto Peen, Dynascaler Surface Preparation Tool, Hand-Held

30336-DYNABRADE

.4 hp, 3,200 RPM, Rear Exhaust, 3/8-24 Spindle Thread, 3 Inch (76 mm) Dia. 7° Offset Rotary Buffer

51400-DYNABRADE

.5 hp 7° Offset Die Grinder, 18,000 RPM, Gearless, Front Exhaust, Short Shank, 1/4 Inch Collet

52211

.5 hp 7° Offset Die Grinder, 20,000 RPM, Gearless, Front Exhaust, Short Shank, 1/4 Inch Collet

52212-DYNABRADE

.5 hp, 15,000 RPM, Front Exhaust, Locking-Type Female Pad, 2 Inch (51 mm) Dia. 7° Offset Disc Sander

52400-DYNABRADE

.5 hp, 20,000 RPM, Front Exhaust, Locking-Type Female Pad, 2 Inch (51 mm) Dia. 7° Offset Disc Sander

52402-DYNABRADE

.7 hp, 20,000 RPM, Gearless, Front Exhaust, Locking-Type Female Pad, 3 Inch (76 mm) Dia. 7° Offset Disc Sander

52412

.33 hp, 18,000 RPM, Gearless, Rear Exhaust, Locking-Type Female Pad, 2 Inch (51 mm) Dia. Right Angle Disc Sander

52590

.5 hp Straight-Line 7-1/4 Inch (184 mm) Extension Die Grinder (Replaces 53507), 20,000 RPM, Extended Rear Exhaust, 1/4 Inch Collet

53502-DYNABRADE