1 x 1 x 2-1/4 x 5 Inch Solid Carbide, 0.03 Corner Radius AlTiN Coated 4-Flute End Mill

4V1525008BW WP15PE

1 x 1 x 1-1/2 x 4 Inch Solid Carbide, 0.06 Corner Radius AlTiN Coated 4-Flute End Mill

4V0525008CW WP15PE

1 x 1 x 1-3/4 x 4-1/2 Inch AlTiN Coated Solid Carbide 5-Flute .030 Corner Radius VariMill II ER Finishing End Mill

5V0E25008BW WS15PE

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.062 radius

3079-25.406

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.09 radius

3079-25.407

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.125 radius

3079-25.409

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, Super A Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.062 radius

3876-25.406

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, Super A Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.09 radius

3876-25.407

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 5 Overall Length, 36/38/37/38° Helix Angle, 0.19 radius

6759-25.400

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, Super A Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.125 radius

3876-25.409

1 Inch (1.0000) Dura-Carb Series 3200 4-Flute GP SE End Mill- .125CR

33744

1 Inch (1.0000) Dura-Carb Series 3200 4-Flute GP SE End Mill- .030CR

33725-FULLERTON

1 x 1 x 4 x 7 Inch AlTiN Coated Solid Carbide .030 Corner Radius 5-Flute VariMill II Long End Mill

TM5W1S25008B-ALTIN-MT

1 Inch (1.0000) Dura-Carb Series 3200 4-Flute GP SE End Mill- .060CR

33737

1 x 1 x 4 x 7 Inch Solid Carbide, 0.03 Corner Radius, AlTiN Coated 4-Flute End Mill

4V6525028BW WP15PE