5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

GMHTCB58RHL5030

5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes ZrN Coated Endmill

GMACB58RHL3015ZRN

5/8 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 3 Flutes Endmill

GMACB58RHL3015

5/8 Inch Diameter, 1-1/4 Inch LOC, 3-1/2 Inch OAL, Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill with 0.030 Radius

17862514A

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut x 6.0000 in. (6) Overall Length x 2.3750 in. (2-3/8) Reach Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

35317

5/8 x 5/8 x 1-1/4 x 3-1/2 Inch TuffCut XT 4-Flute Endmill - .030CR ALtima Blaze Coated

27762514B

0.6250 in. (5/8) Cutter Diameter x 0.0600 in. Radius x 1.6250 in. (1-5/8) Length of Cut 5 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

TC26476

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.0600 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 3.5000 in. (3-1/2) Overall Length Carbide 5 Flute TPLUS Coated Corner Radius Endmill

87389

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.5000 in. (3-1/2) Overall Length Carbide 6 Flute Tplus Coated Carbide Corner Radius Endmill

83344

0.6250 in. (5/8) Cutter Diameter x 0.0600 in. Radius x 2.2500 in. (2-1/4) Length of Cut 5 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

TC27136

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 3 Flute Zplus Coated 45 Deg. Helix Corner Radius Endmill

29482

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.1200 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 3.5000 in. (3-1/2) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

45334-HELICAL

5/8 (.6250) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- .045CR

33831

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 3.5000 in. (3-1/2) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

34332W

0.6250 in. (5/8) Cutter Diameter x 0.6250 in. (5/8) Shank Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

34317-HELICAL