1/2 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill

GM12RH4015

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

GMHTCB12R5030

1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMS2 Coated Endmill

GMRF12RXL4015

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill

GMHTCB12R7030

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

59956

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.015 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

GMHT12R5015

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

59955

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.06 in. Radius GMS2 Coated Carbide 5 Flutes Endmill

GMHT12R5060

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

59957

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius GMS2 Coated Carbide 5 Flutes Endmill

GMHT12R5030

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

59958

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

59877-HELICAL

1/2 (.5000) 5-Flutes FC20 Coated Solid Dura-Carb Fantom 2.0 HP End Mill- .030CR

37643

1/2 Inch Diameter, 5/8 Inch LOC, 2-1/2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill with 0.030 Radius

17850004A

1/2 in. Diameter x 1-1/2 in. Length of Cut x 4 in. Overall Length x 0.06 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill

GM12RL5060