0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1870 in. (3/16) Length of Cut x 0.6250 in. (5/8) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

64508-C6

1/8 (.1250) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- .005CR

31710-FULLERTON

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

46908-C6

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

6759-3.172

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.1870 in. (3/16) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius Finisher

872308-C6

0.1250 in. (1/8) Cutter Diameter x 0.0080 in. Radius x 0.1870 in. (3/16) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

847908-C6

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

84669

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

81850-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.0030 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

923708-C6

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

54908-C6

0.1250 in. (1/8) Cutter Diameter x 0.0300 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 3 Flute Carbide V-Helix Corner Radius End Mill

891908-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.0300 in. Radius x 0.1870 in. (3/16) Length of Cut x 0.6250 in. (5/8) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

910208-C6

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1870 in. (3/16) Length of Cut x 0.3750 in. (3/8) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

947708-C6

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

84671

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length Carbide 2 Flute Zplus Coated 45 Deg. Helix Corner Radius Endmill

82330